Commercial Plumber: Save Water and Energy with 10mm Hot Water Pipes in Wellington Homes
Commercial Plumber: Save Water and Energy with 10mm Hot Water Pipes in Wellington Homes
Are you tired of standing around waiting for hot water to reach your tap or shower? That delay not only wastes your time but also sends litres of cold water—and money—straight down the drain. At Laser Plumbing Wellington East, we offer an effective and energy-efficient solution: upgrading to 10mm hot water pipes.
What Are 10mm Hot Water Pipes?
Traditional plumbing systems typically use 15mm or 20mm diameter pipes for hot water. These larger pipes hold more water, which means more “dead” water (cold water sitting in the pipe) needs to be flushed out before the hot water reaches the tap. In contrast, a 10mm pipe has a smaller internal volume. As a result, the hot water arrives faster, and significantly less water is wasted in the process.
Switching to 10mm pipes can reduce water waste by up to two-thirds compared to 20mm piping. That means reduced water usage, lower energy consumption, and real savings on your monthly bills.
How 10mm Pipes Improve Efficiency
In older plumbing systems, a single large pipe would often run to multiple taps with tee-offs along the way. This design increases the length of pipe that needs to be cleared before hot water reaches your tap. In a modern, water-conscious system, each fixture (tap or shower) is supplied with its own 10mm hot water pipe directly from the hot water cylinder. This greatly reduces water loss and improves delivery speed.
Even if you’re not planning a major renovation, accessible pipes in your ceiling or under the house can often be retrofitted with 10mm piping. And if you're building or renovating, it’s the perfect time to install 10mm hot water lines throughout your home for long-term savings.
Insulating for Even Greater Results
To maximise energy efficiency, we also recommend lagging (insulating) your new 10mm pipes. This helps retain heat within the pipe, further reducing heat loss and ensuring your water arrives warmer and faster.
Ideal for Mains Pressure Homes
10mm pipes are designed for homes with mains pressure hot water systems. If your home runs on mains pressure, you can enjoy the water-saving benefits of 10mm pipes without noticing any drop in water pressure.
Upgrade Your Plumbing, Save More
Laser Plumbing Wellington East can assess your current plumbing system and recommend the best approach to upgrade your hot water pipes. Whether you're renovating or just want to stop wasting water, switching to 10mm pipes is a smart investment. Contact our team today to discuss your options and start saving water and energy with every shower.